177 Inch Pounds To Foot Pounds (2024)

FAQs

Does 12 inch pounds equal 1 foot-pound? ›

How Many Inch-Pounds Are in a Foot-Pound? There are 12 inch-pounds in a foot-pound, which is why we use this value in the formula above. Foot-pounds and inch-pounds are both units used to measure torque.

If you want to convert inch-lbs to foot-lbs, you take the inch-lb number and divide it by 12.

How much is 89 inch pounds to foot pounds? 89 inch pounds equal to 7.417 foot pounds. You can calculate this by dividing the inch pounds by 12 . The formula can be written as: foot pounds = inch-pounds / 12 .

Btw, 72 inch pounds is the same as 6 foot pounds which isn't very much torque at all.

60 is tight. Yes 60 inch pounds is precisely 5 foot pounds. If you don't have a torque wrench, I'd ask someone nearby to show you 60 inch pounds: Trying to describe it over the Internet is difficult to result in a consistent tightness.

If it is a digital torque wrench you can switch between ft lbs and inch lbs, if it is a mechanical wrench you will need an inch lbs torque wrench specifically. You can multiply ft lbs by 12 to to get inch lbs but most ft lbs wrenches do not adjust low enough for inch lbs work..

Until you get the inch-lb torque wrench, anything listed as torque in inches means, "not too tight!" You can usually finger tighten a bolt to 50 inch-pounds with little trouble.

1 foot pound-force is equivalent to: 1.355 817 948 331 400 4 joules. 13558179. 483314004 ergs.

A foot pound is a unit of energy, not to be confused with the pound foot, which is a measure of torque. The foot pound is a measure of a pound of force applied over one foot. This unit is rarely used now.

How tight is 89 in pounds? ›

89 in/lbs = 7.4 ft/lbs (12in per foot, just like distances). And that means you can hand-tighten, quite honestly. Or buy another wrench that goes from...

Solution: One gallon of water weighs approximately 8.34 pounds, which is equivalent to 3.785 kg.

Similarly, an inch-pound (or pound-inch) is the torque of one pound of force applied to one inch of distance from the pivot, and is equal to 1⁄12 lbf⋅ft (0.1129848 N⋅m). It is commonly used on torque wrenches and torque screwdrivers for setting specific fastener tension.

The “foot-pound” (or more accurately, “foot-pound-force”), on the other hand, is a measurement of work. Work is the measurement of force over a given distance. So one foot-pound-force (ft-lbf or just ft-lb) is the energy required to move a one pound object one foot of linear distance.

A unit of work equal to the work or energy needed to lift a one-pound weight a distance of one foot against the force of the Earth's gravity. One foot pound is equivalent to 1.3558 joules. A unit of torque equal to a pound of force acting perpendicularly to an axis of rotation at a distance of one foot.

One pound (mass) = 0.45359237 kilograms. This gives the exact conversion factor: One pound-foot = 1.3558179483314004 newton metres. The name "pound-foot", intended to minimize confusion with the foot-pound as a unit of work, was apparently first proposed by British physicist Arthur Mason Worthington.

Conversion factors

1 foot pound-force is equivalent to: 1.355 817 948 331 400 4 joules.

A unit of work equal to the work or energy needed to lift a one-pound weight a distance of one foot against the force of the Earth's gravity. One foot pound is equivalent to 1.3558 joules.